HIFLEX NEO-ES

Basic performance

number of steps1-3
Inside dimensionsW500 x H350 x D350 x 1-3, W600 x H600 x D500 x 2
content by volume61L x 1-3 / 180L x 2
Temperature range：: -40°C to +100°C
Humidity rangeThe following table shows the list of the standard products for the following models: 20%RH to 98%RH.

Product Features

High temperature and humidity characteristics

Shares components with the high-end HIFLEX NEO-E model to achieve stable temperature and humidity characteristics. Capable of humidification operation up to 98%RH, it can handle a wide range of testing conditions.

Powerful sirocco fan

A sirocco fan with large air volume and high air pressure is employed. Even with specimens installed, uniform distribution performance within the chamber is ensured.

DC inverter controlled air-cooled rotary chiller

Equipped with DC inverter controlled air-cooled rotary chiller. Refrigeration system efficiency
Optimized refrigeration capacity by unique refrigerant flow control using an electronic expansion valve. Guaranteed temperatures up to -40°C. The test environment is stabilized and power consumption is drastically reduced.

Ambient operating temperature

It retains robustness to reach the minimum temperature (-40°C) even when the ambient temperature is +35°C.

Humidified water sterilizer (optional)

UV irradiation sterilization lamps are used to inhibit the growth of bacteria, preventing problems caused by sliminess and water stains in the piping system. This improves the reliability of water circuits.

operability

Rectangular cable holes (both sides)Standard: Rectangular cable holes are provided on both sides of the main body. Measurement devices can be installed on either the left or right side. This greatly expands the degree of freedom of installation location.
Water AttachmentWater supply tank with a capacity of 10 liters can be easily removed with a one-touch operation for easy water supply and cleaning.
Dust filterHigh maintainability is also taken into consideration for the dust filter of the condenser for refrigeration equipment. Periodic cleaning can be easily performed.
Main unit control panelSimple program setting is possible with simple operation.
PC/Tablet connection: Advanced management such as operational settings, status monitoring, data downloading, and e-mail notifications can be performed via a Web browser.
Smart Connect (optional)Intuitive touch panel operation enables detailed settings and data management.

Environmentally Friendly

Low GWP refrigerant R-448A is used

With a GWP value of 1387, it reduces environmental impact by approximately 65% compared to conventional R-404A. With an ozone depletion potential (ODP) of zero, it is a nonflammable, nontoxic, and inert refrigerant. It meets the 2025 target value (GWP of 1500 or less) under the CFC Emission Control Law.

Low Temperature Incubator

HIFLEX NEO-ES FL type

Basic performance

number of steps1-3
Inside dimensionsW500 x H350 x D350 x 1-3, W600 x H600 x D500 x 2
content by volume61L x 1-3 / 180L x 2
Temperature range：: -40°C to +100°C

option

+150°C specification

+180°C specification

water purifier

Power cable (8m)

Power cable (3m)

Main body fixing metal fittings

Additional cable hole (round φ50)

Additional cable hole (square)

Additional cable hole (round φ120)

inspection report

Certificate of Calibration

SUS cooling coil specifications

Polymer sensor type hygrometer

Low siloxane gas specification

Automatic Power-Outage Recovery Function

Shelf board and shelf support (load capacity: 15 kg)

Signal Tower

rotation warning light

Additional over-temperature protector

emergency stop switch

defrosting device

non-frosting device

Arm-type terminal fixing stand

Smart Connect (dedicated terminal)

paperless recorder

RS485 interface

integrated timer with reset

Weipalace Observation Window

Tempered glass inner door

Butt for chamber body

Smart Controller (web substrate)

Shelf board and shelf support (load capacity: 30 kg)

Power cable (5m)

specification sheet

型式	SXN401-E	SXN402-E	SXN403-E	SXN412-E	SLN401-E	SLN402-E	SLN403-E	SLN412-E
温度範囲	-40℃〜+100℃
湿度範囲	20%RH to 98%RH				–
温度上昇時間	35分以内 -40℃から+100℃まで
温度下降時間	55分以内 +20℃から-40℃まで			50分以内 +20℃から-40℃まで	55分以内 +20℃から-40℃まで			50分以内 +20℃から-40℃まで
温度変化速度（上昇）	4.0℃/分 -26℃から+86℃まで
温度変化速度（下降）	2.5℃/分 +86℃から-26℃まで			3.0℃/分 +86℃から-26℃まで	2.5℃/分 +86℃から-26℃まで			3.0℃/分 +86℃から-26℃まで
温湿度変動	±0.3°C/±2.5%RH				±0.3°C
温湿度勾配	3.0℃ in temperature operation｜2.0℃/5.0%RH in temperature/humidity operation				温度運転時 3.0℃
空間温湿度偏差	2.5℃ during temperature operation｜1.5℃/5.0%RH during temperature/humidity operation				温度運転時 2.5℃
運転可能周囲温度範囲	+5℃～+40℃
Internal dimensions (W x H x D mm)	500 x 350 x 350	(500 x 350 x 350) x 2	(500×350×350)×3	(600 x 600 x 500) x 2	500 x 350 x 350	(500 x 350 x 350) x 2	(500×350×350)×3	(600 x 600 x 500) x 2
内容量（リットル）	61	61 x 2	61 x 3	180 x 2	61	61 x 2	61 x 3	180 x 2
External dimensions (W x H x D mm)	660 x 1285 x 1040	660 x 1885 x 1040	660 x 1955 x 1375	760 x 1855 x 1645	660 x 1285 x 1040	660 x 1885 x 1040	660 x 1955 x 1375	760 x 1855 x 1645
Mass (kg)	190	330	500	475	185	325	495	470
外装鋼板	ボンデ鋼板（焼付塗装仕上げ）
内槽鋼板	ステンレス鋼板 (SUS304)
送風機	シロッコファン
冷凍機	DC inverter controlled air-cooled rotary chiller
冷媒	R-448A
加温ヒータ	ニクロムストリップヒータ
加湿ヒータ	シーズドヒータ (SUS316L)				–
冷却器	プレートフィンコイル
制御センサ	JIS C1604 3-wire resistance thermometer Pt100
制御方式	PID control
表示方式	LED indication
表示分解能	0.1°C/1%rh				0.1℃
設定方式	Key-in method using the main unit’s display unit / input method using Smart Connect (optional) or a terminal equipped with a Web browser
イーサネット	10BASE-T/100BASE-TX AUTO-MDIX compliant RJ45 connector x 1 channel
USB	USB2.0 TYPE A connector x 1 channel
メモリ容量	8GB
電源	AC200V 3φ 50/60Hz Voltage fluctuation range ±10% Class D grounding
加湿水	イオン交換水又は純水など (0.1 to 10 μS/cm)				–
Maximum load current (A)	15	30	45	46	9	18	27	32
Operating current (A)	11	22	33	34	7	14	21	26
Exhaust heat (kW)	0.62〜3.6	1.24〜7.2	1.86〜10.8	1.0〜9.6	0.62〜3.6	1.24〜7.2	1.86〜10.8	1.0〜9.6
保護装置	主電源漏電遮断器、ファンモータ過負荷継電器、温度過昇防止器、冷凍機圧力スイッチ、冷凍機過負荷継電器、冷凍機過熱保護装置、逆相検知器、加温ヒータ過負荷保護ヒューズ、制御回路過負荷保護ヒューズ、センサ断線検知機能、温(湿)度上下限警報機能、停電通知アラーム、フィルタ清掃アラーム、空焚防止器、加湿ヒータ過負荷保護ヒューズ、ウィック乾燥アラーム、給水タンク水位低下アラーム、回路保護漏電遮断器、インバータ異常検知機能				主電源漏電遮断器、ファンモータ過負荷継電器、温度過昇防止器、冷凍機圧力スイッチ、冷凍機過負荷継電器、冷凍機過熱保護装置、逆相検知器、加温ヒータ過負荷保護ヒューズ、制御回路過負荷保護ヒューズ、センサ断線検知機能、温度上下限警報機能、停電通知アラーム、フィルタ清掃アラーム、回路保護漏電遮断器、インバータ異常検知機能
付属機能	メモリバックアップ機能、一時停止機能、モニタ機能、自己診断機能、停電復帰保護機能、瞬間停電保持機能、外部警報出力機能、試験終了出力機能、供試品電源インタロック機能、オートスタート／タイマ機能、加湿遅延運転機能、常温待機運転機能				メモリバックアップ機能、一時停止機能、モニタ機能、自己診断機能、停電復帰保護機能、瞬間停電保持機能、外部警報出力機能、試験終了出力機能、供試品電源インタロック機能、オートスタート/タイマ機能、常温待機運転機能
本体	Square measurement hole (100 x 30 mm, 2 locations on left and right sides), caster adjuster, dust filter for refrigerator condenser				Square measurement hole (100 x 30 mm, 2 locations on left and right sides), caster adjuster, dust filter for refrigerator condenser
付属品	Wick gauze (12 wicks/tank), silicon stopper for square measurement hole (2 stoppers/tank), adjuster fixture (4 fixtures/unit, depending on model), key for door latch (2 keys/tank), instruction manual (1 copy), water tank (401, 402: 10L, 403, 412: 20L, all models 1 tank/unit), certificate of inspection acceptance				角型測定孔用シリコン栓(2個/槽)、アジャスタ固定金具(4個/台、機種による)、扉ラッチ用キー(2個/槽)、取扱説明書（1部）、検査合格証